Press "Enter" to skip to content

Steps for Painting Concrete Rendered Walls

Color can make walls dazzling offering fresh and clean palette for much more decorating. Generally there are some projects that you can do easier than others. Yet , generally speaking painting is one of the most cost effective and easiest projects to enjoy home renovations. Portrait concrete rendered walls will improve outdoor and interior concrete walls. In order to be sure that you like painting this part of your house, you need to carefully follow some steps. Lowes Rendering

Identify the Materials Used on the Concrete Wall

You must know whether your wall is made of acrylic or cement make. If you have not a way to know your wall’s history, you can still figure out the type being used. Typically, fat render looks more like paint than its concrete counterpart. Meanwhile, cement provide looks more grainy and is likely to be found in a different finish style to ensure good decorative effects. After you have determined the sort of provide, you can continue to the next stop to prepare your walls. 

Apply a Sealer Coat

In case your rendered concrete wall is constructed of acrylic, you can apply one coat of sealer. Then let the sealer dry for some several hours. When it’s dry, try to feel the end to find out if its easy or abrasive. When you feel the wall soft, you don’t need to have the second coat. If perhaps you feel it hard, it is a must to apply an additional cover of sealer. Allow second coat dry overnight.

Make use of Power Rotary Sander on Walls with Cement Provide

Using a clean paintbrush, dust the excess off and apply a layer of sealer. Concrete surfaces with cement render will have to be applied with 2 or 3 sealer coats. Let each coat dry for some hours.

Use a Clean or Roller in Making use of the Concrete Paint

Prior to you apply the second coat, the first coating must be allowed to dry for some several hours. After the application of the second coat and it has gone dry out, check the surface to know in order to do some touch ups on the paint. Areas that contain bands that are not totally sealed are likely to make the paint show up slightly lighter. But you can jazz up this by making use of brush after some amount of paint.

Comments are closed.