Built Hardwood Floors
When shopping for hardwood floors, there are many choices in plank width, wood kinds, colors and the way each of these hardwoods are manufactured. Making a decision00 of the perfect fit for your home can seem to be mind-boggling. Simplify your decision with one of the most versatile types of hard wood flooring currently available. thestrattongroup
Engineered wood flooring can be installed in nearly every room in your home, even people that have a moisture exposure up to 4%. Traditional hardwood is usually installed in moisture-free areas such as family rooms, dining rooms or living rooms. With manufactured hardwood, one can now have wood floors installed in kitchens, master restrooms, and guest bathrooms or in basements. One be aware however, would be to avoid installing any type of hardwood in a child’s bathroom, and there is ample instances for accidents near to the toilet or overflow from the tub/shower.
Acting as a security resistant to the wood’s natural inclination to expand and deal under humid conditions, manufactured hardwood is made of several layers of natural wood and glued collectively, for added strength. During the layering process, each ply of wood is placed atop the other in the opposite direction. Every layer of engineered hard wood is a thin level variation of natural hard wood or softer plywood including the tongue and grooved system. However the top layer, or veneer, is a thicker layer of the chosen wood kinds and can withstand the daily usage associated with the room.
Most hardwoods today are delivered pre-finished. This kind of added good thing about engineered hard wood allows the homeowner to commence using the area immediately after installation. During the finishing process, engineered hard wood is cured with an UV light. Factory closes cured via ultra-violet light have a harder surface finish overall and the manufacturer is able to make the wood with a lot more coats to reduce damage in the future.
One can still purchase unfinished hardwoods today. Though it is necessary to take note that unfinished hardwoods require an exceptional amount of time to use the required coats at the job-site which means the room will never be available for use until complete. Some additional detriments to installing incomplete hardwoods are: the gases associated with finishing the floor on-site, the reduced number of coats being applied and the absence of ability to close the finish with the UV light process.
Today that we have discovered several of the great things about manufactured hardwood, let’s review the options available in the manufacturing process. Engineered wood is made in 3 variations.
1. Rotary Peeled Veneers: Processed in a conditioning vat make into a huge wood lathe.
2. Layers: Peeled off the log in long strip.
3. Grain: Visually fragile
4. Structural integrity: Fragile
5. Production Cost: Low Cost
6. Yield from log: Optimum
1. Chopped: Processed in a health vat.
installment payments on your Layers: Sliced off the log as if it were cheese.
3. Grain: Visually good
4. Structural integrity: Better
5. Production Cost: Medium Expense
6. Yield from record: High
1. Sawed Deal with: Traditional process by using a saw mill.
2. Layers: Graded, sorted then sawed into desired density
3. Grain: Visually best
4. Structural integrity: Very best
5. Production Cost: Greatest Price
6. Yield from log: Low
Choices made from the info in the table will be decided by the use of the room where the material will be installed. Value is usually a factor in any home improving job and certain types of processed wood will fit better into the task budget than others. One of the choices will still give the finished project with a clean and durable product, that will last longer than most other types of flooring materials. In reality, engineered hardwood flooring can last between 40 and 60 years with the proper care and normal wear and tear.
Possibly if the floor commences to show some wear after heavy usage, manufactured hardwood can be sanded between 3 and 5 times before it needs to be replaced entirely. However, because engineered wood can be damaged easily in the sanding process, it is highly advised a hardwood floor texturing professional is obtained given the sanding process and the harmful chemicals used in the refinishing process.
Installation of engineered hard wood can be handled in several ways. Planks may be stapled-down, glued-down or floated over different types of sub-floors. The most used installation for concrete slabs are glue-down and floating, simply because it is not possible to staple or nail into concrete when installing engineered hardwood.
Even so, some types of manufactured hardwood may also be floated over existing flooring surfaces such as tile or vinyl floors. Though it is important to check with the manufacturer specs for this process and it is equally important if not more in order that the current sub-floor is steady and well adhered to the joists to avoid shifting, breakage or heaving of the newly installed product.